Brake & CV Joint Cleaner – Non Chlorinated

Will help remove surface contaminants such as brake fluid, oil, and grease from brake linings, drums, other brake parts and CV joint assemblies. Degreases quickly and can be used without disassembling the brake unit. Brake pads or linings that are impregnated with oil or grease should be replaced, not cleaned.

OUTSTANDING PROPERTIES

  • Leaves no residue and dries quickly.
  • Helps retard the release of asbestos dust and other airborne particulate matter when following directions.
  • Use SOLDER SEAL® GUNK® BRAKE CLEANER on: conventional brake units, linings and shoes, drums, cylinders, springs, disc brake units C.V. joints, caliper units, brake pads, discs, and related parts. Contains no chlorinated solvents.

 

SKU: M715 Categories: , , ,

Description

USE DIRECTIONS

  • turn engine off then lightly wet down surfaces to be cleaned by spraying in short bursts from a distance of 45 to 60 cm.
  • Do not spray on hot metal surfaces like exhaust pipes. After the surfaces have been wetted, continue spraying at a distance of 30 to 45 cm to flush contaminants from surfaces. Spray brake parts thoroughly, then allow to air dry or wipe with
    soft clean cloth. If deposits are heavy, repeat application.

 

Documents

Download SDS

Related products