Description
OUTSTANDING PROPERTIES:
Contains no silicones or carbon tetrachloride.
USE DIRECTIONS:
Brake pads or linings that have been heavily soiled (impregnated) with oil or grease should be replaced, not cleaned.
Consult a professional mechanic. To help retard the release of asbestos dust and other airborne particulate matter, follow these DIRECTIONS FOR USE carefully and in numerical order:
- Protect rubber parts and boots from accidental overspray.
- Lightly wet down surfaces to be cleaned by spraying in short bursts from a distance of 18 to 24 inches. DO NOT SPRAY ON HOT METAL SURFACES LIKE EXHAUST PIPES.
- After surfaces have been wetted, continue spraying at a distance of 12 to 18 inches to flush contaminants from surfaces. Spray brake parts thoroughly, then allow to air dry or wipe with soft clean cloth. If deposits are heavy, repeat application. Collect any runoff for proper disposal. See DISPOSAL, below.
PRODUCT LIMITATIONS:
THIS PRODUCT WILL ATTACK PAINTED SURFACES AND PLASTIC. IF SPRAYED ON, DO NOT RUB
SURFACES, FLUSH WITH WATER IMMEDIATELY.
