CARBURETOR PARTS CLEANER CHLORINATED

USE DIRECTIONS
Carburetor Linkage and Choke: Make sure vehicle is off and engine
is cold. Remove air cleaner and spray carburetor and linkage thoroughly with
GUNK® Carburetor Parts Cleaner. Let soak and re-spray to flush off remaining
deposits. Clean Choke by working butterfly valve while spraying. Allow excess to
evaporate to avoid potential fi re before starting vehicle. Throttle Plate and Throat:
To clean throttle plate and carburetor throat spray short bursts with engine
running and vehicle in neutral. Lightly “rev” engine to flush away deposits. After
cleaning replace any parts you may have disconnected. PVC Valve: Insert snorkel
into spray valve and use short bursts directly into PVC valve, working plunger
back and forth. Manifold Heat Control: With engine off and cold, clean manifold
heat control by spraying both ends of heat riser shaft, moving counterweight
until valve moves freely. Allow excess to evaporate to avoid potential fire before
starting vehicle. PRODUCT WILL NOT HARM CATALYTIC CONVERTERS or OXYEGEN
SENSORS. MSDS Sheets available at gunk.com. PRODUCT WILL ATTACK PAINTED
SURFACES and PLASTIC. FLUSH WITH WATER IMMEDIATELY – DO NOT RUB.